Issue#2266: Linux - Sid askin to remove openrc...

  • tia !

    synaptics says you have 1 broken package on your system! >>> sysvinit-utils <<<


    Code:

    # aptitude full-upgrade           
    The following NEW packages will be installed:
      blueman{a} fonts-noto{a} fonts-noto-cjk{a} fonts-noto-mono{a} fonts-noto-unhinted{a} gir1.2-appindicator3-0.1{a}
      initramfs-tools-core{a} libappindicator3-1{a} libavfilter-ffmpeg5{a} libdbusmenu-gtk3-4{a} libgnutls30{a} libimobiledevice6{a}
      libindicator3-7{a} liblouis-bin{a} libpgm-5.1-0{a} libsodium13{a} libsuitesparseconfig4.4.6{a} libusbmuxd4{a} libzmq3{a}
    The following packages will be upgraded:
      busybox cinnamon cinnamon-common cinnamon-control-center cinnamon-control-center-data cinnamon-core cinnamon-desktop-data
      cinnamon-desktop-environment cinnamon-l10n cinnamon-screensaver cinnamon-session cinnamon-session-common
      cinnamon-settings-daemon cjs cpp-4.9 cpp-5 cups cups-browsed cups-bsd cups-client cups-core-drivers cups-daemon cups-filters
      cups-filters-core-drivers cups-ppdc debianutils empathy exim4-base exim4-daemon-light fonts-opensymbol fuse gcc-4.8-base
      gcc-4.9 gcc-4.9-base gcc-5 gcc-5-base gedit gedit-common gir1.2-cinnamondesktop-3.0 gir1.2-cmenu-3.0 gir1.2-gnomebluetooth-1.0
      gir1.2-gst-plugins-base-1.0 gir1.2-gstreamer-1.0 gir1.2-javascriptcoregtk-4.0 gir1.2-meta-muffin-0.0 gir1.2-networkmanager-1.0
      gir1.2-polkit-1.0 gir1.2-upowerglib-1.0 gir1.2-vte-2.91 gir1.2-webkit2-4.0 glib-networking glib-networking-services
      gnome-bluetooth gnupg-agent gnupg2 gnustep-base-runtime grub-common grub-pc grub-pc-bin grub2-common gstreamer1.0-libav
      gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly gstreamer1.0-pulseaudio
      gstreamer1.0-x gvfs gvfs-backends gvfs-bin gvfs-daemons gvfs-fuse gvfs-libs imagemagick imagemagick-6.q16 imagemagick-common
      init init-system-helpers{b} initramfs-tools initscripts kde-style-qtcurve-qt4 kde-style-qtcurve-qt5 klibc-utils libamd2.4.1
      libasan1 libasan2 libatomic1 libavcodec-ffmpeg56 libavformat-ffmpeg56 libavresample-ffmpeg2 libavutil-ffmpeg54 libc-bin
      libc-dev-bin libc-l10n libc6 libc6-dev libcamd2.4.1 libcc1-0 libccolamd2.9.1 libcholmod3.0.6 libcilkrts5
      libcinnamon-control-center1 libcinnamon-desktop4 libcinnamon-menu-3-0 libcjs0 libcolamd2.9.1 libcups2 libcupscgi1
      libcupsfilters1 libcupsimage2 libcupsmime1 libcupsppdc1 libcurl3 libcurl3-gnutls libfontembed1 libfuse2 libgadu3 libgcc-4.9-dev
      libgcc-5-dev libgcc1 libgfortran3 libgnome-bluetooth13 libgnomeui-0 libgnomeui-common libgnomevfs2-0 libgnomevfs2-extra
      libgnustep-base1.24 libgnutls-openssl27 libgomp1 libgpod-common libgpod4 libgraphite2-3 libgsoap7 libgstreamer-plugins-bad1.0-0
      libgstreamer-plugins-base1.0-0 libgstreamer1.0-0 libgtk-vnc-2.0-0 libgvnc-1.0-0 libhtml-parser-perl libimage-magick-perl
      libimage-magick-q16-perl libitm1 libjavascriptcoregtk-4.0-18 libklibc liblsan0 libmagick++-6.q16-5v5 libmagickcore-6.q16-2
      libmagickcore-6.q16-2-extra libmagickwand-6.q16-2 libmediastreamer-base3 libmpx0 libmuffin0 libnemo-extension1 libneon27-gnutls
      libnm-glib-vpn1 libnm-glib4 libnm-util2 libnm0 libobjc4 libortp9 libpam-systemd libpolkit-agent-1-0 libpolkit-backend-1-0
      libpolkit-gobject-1-0 libpostproc-ffmpeg53 libqt5concurrent5 libqt5core5a libqt5dbus5 libqt5gui5 libqt5network5 libqt5opengl5
      libqt5printsupport5 libqt5sql5 libqt5sql5-sqlite libqt5test5 libqt5widgets5 libqt5xcbqpa5 libqt5xml5 libqtcurve-utils2
      libquadmath0 librtmp1 libsmbclient libsqlite3-0 libstdc++6 libswresample-ffmpeg1 libswscale-ffmpeg3 libsystemd0 libtsan0
      libubsan0 libudev1 libumfpack5.7.1 libupnp6 libupower-glib3 libvlc5 libvlccore8 libvncclient1 libvncserver1 libvte-2.91-0
      libwacom-common libwacom2 libwavpack1 libwbclient0 libwebkit2gtk-4.0-37 libwebkit2gtk-4.0-37-gtk2 libx264-148 libxapian22v5
      libxdmcp6 lintian linux-compiler-gcc-5-x86 linux-headers-4.3.0-1-amd64 linux-headers-4.3.0-1-common linux-libc-dev locales make
      muffin muffin-common multiarch-support mutt mysql-server-core-5.5 nano nemo nemo-data nemo-fileroller network-manager ntfs-3g
      openssh-client openssh-server openssh-sftp-server policykit-1 publicsuffix python-dbus python-dbus-dev python-imaging
      python-pil python-pycurl python-xapian python3-dbus python3-pil python3-pycurl rsyslog ruby-minitest samba-libs synaptic
      systemd sysvinit-core telepathy-gabble telepathy-salut ucf udev uno-libs3 upower usbmuxd vino virtualbox virtualbox-dkms
      virtualbox-qt vlc vlc-nox vlc-plugin-notify vlc-plugin-samba wget
    The following partially installed packages will be configured:
      sysvinit-utils
    The following packages are RECOMMENDED but will NOT be installed:
      dirmngr gedit-plugins gnome-control-center gnote libreoffice-calc libreoffice-gnome libreoffice-impress libreoffice-writer
      libwacom-bin rhythmbox rhythmbox-plugin-cdrecorder rhythmbox-plugins
    261 packages upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
    Need to get 57.9 MB/324 MB of archives. After unpacking 132 MB will be used.
    The following packages have unmet dependencies:
     init-system-helpers : Conflicts: openrc (<= 0.18.3-1) but 0.18.3-1 is installed.
    The following actions will resolve these dependencies:

        Remove the following packages:   
    1)    openrc                         

        Install the following packages:   
    2)    sysv-rc [2.88dsf-59.3 (unstable)]



    Accept this solution? [Y/n/q/?]

    what to do ?

    0 Answers

    Sorry, your answer is too short !

  • Issue#2338: Linux - how to completely remove ubuntu boot entry in bios menu

    hello, i am facing problems in removing the boot entry in bios menu. i tried to remove it but it keeps restoring itself. i followed the steps from here. "http://askubuntu.com/questions/63610/how-do-i-remove-ubuntu-in-the-bios-boot-menu-uefi" and couldn't perform the following commands with success "Suppose your EFI partition was /dev/sda2, then mount it on an empty folder anywhere. sudo mkdir /mnt/efipart sudo mount /dev/sda2 /mnt/efipart Now we have to find the directory Ubuntu or any other distro's name in this partition. It is mostly under EFI/distro_name. Remove that directory and its contents by (PLEASE MAKE SURE YOU ARE DELETING THE CORRECT DIRECTORY) sudo rm -r ubuntu." need help?

  • Issue#5738: Ubuntu - Linux Mint issue

    How do I use a folder for desktop slide show instead of all pictures?

  • Issue#11647: Linux - how to add or remove a user to a folder for permissions / replace a existing user with anoth

    Hello Everyone, Question..... I created a new folder called "test". On the folder for permissions it has "root" for owner, group "wheel", and "everyone" for read only access. Let's say I wanted to create a new user named "bob", but I wanted to add "bob" to the permissions on the folder "test", how would I do this ? Also, if I wanted to remove "everyone" from the folder permissions and replace it with "bob", how would I do that ? Thanks !!!

  • Issue#14047: Linux - Remove network drive entry from GTK-based file manager

    Hi all, about a year ago I added a network drive (via webdav / davfs) to my desktop Linux. As far as I can remember, I added the necessary line in /etc/fstab und created a secrets file in my HOME-directory under .davfs with the login credentials. The server has changed and I realized that I don't really need the network drive mapped to my desktop computer anymore, so I wanted to remove it. I deleted the corresponding line in /etc/fstab, renamed the secrets file to secrets-OLD and checked whether there was any reference to the network drive in the webdav configuration file .davfs.conf (There was none). For some reason in the GTK-based graphical file managers NAUTILUS (it's called FILES for some reason at least in the German version) and NEMO, but not QT-based DOLPHIN the network drive is still shown in the side pane. I couldn't find a way to remove it from the list. I guess that in some GNOME configuration file there is still a reference to it. I looked through the settings in the dc

  • Issue#41673: Linux - systemd dependency issue?

    Hello everyone I am running owncloud on CentOS 7. Everything is working perfectly except one. When I reboot server in owncloud I have error: app":"cron","message":"Failed to connect to the database: An exception occured in driver: SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket ' In: /usr/lib/systemd/system httpd.service [Unit] Description=The Apache HTTP Server After=network.service mariadb.service remote-fs.target nss-lookup.target mariadb.service [Unit] Description=MariaDB database server After=syslog.target After=network.service I have configured start services in this manner, it solved problem but after several reboot owncloud still logs same error. My question, does that happen because of delay of mysql creates socket after httpd service is starting or it is not related with service dependencies? Thank you

  • Issue#46621: LXer: February 2016 Issue of Linux Journal

    Published at LXer: All of us here in the Linux Journal community have a love for Linux and open source, but even inside our world, there are some topics that are just downright fun! This month is full of articles we're passionate about. Read More...

  • Issue#53224: Linux - Account details issue on kubuntu

    Hello, I am having an issue with account details on Kubuntu on for some reason on "Password and User Account" where you put your name or email from your user, I try to change information and every time I reboot system information goes back to the one before. So, my question is how I can change this, where I have to go or what file I need to edit so the changes I make on email and name are permanent and dont get reset every time I reboot the machine. Thanks.

  • Issue#54933: Linux - Issue with different version of a library (libX11)

    I have a Debian-derived Linux distro with "libX11-6" installed. Every time I try to configure ROOT (a package), then I get the error: "libX11 MUST be installed". I saw the configuration file log and I found this: " [...] libraries to check for: libX11.so libX11.sl libX11.tbd [...]" It tries to find these libraries in some dir, without luck. If I try to install "libX11-dev", it answers with "libX11-dev is already the newest version". The version is the same of libX11-6... I think this problem is due to different filesname of different version of the same library. How can I solve this problem? I am a newbie in linux

  • Issue#59309: DPI issue on linux mint mate

    So I recently did a reinstall of mint (mate) and now my text is small on all 3rd party applications. When I bring up any system text, it's all fine it is only in applications like firefox, or a 3rd party application like osbuddy. I'm wondering if it could be a screen resolution issue, or something along those lines. Any suggestions are appreciated.

  • Issue#59468: Linux - Gnome Screen Lock Issue

    Hi I have Fedora 23 installed on my Asus Laptop. My problem is the following. After the desktop is inactive for 5 minutes, it becomes black (Only the mouse cursor is appearing). Then, if a touch a keyboard button or a mouse, the screen lock appears. I expected that the screen will become black after certain time inactivity. But this is not the case. I looked for similar problems in forums and I did not find somethings relevant. Any Help or suggestion is appreciated. Thaks in advance. By the way, I am using Gnome 3.18.2. I have also KDE Desktop and MATE Desktop installed on my system. Thanks in advance

  • Issue#62983: Linux - Ubuntu 15.10 won't boot if a remove unused discs

    I have an Ubuntu 15.10 running on a MSI B75MA-P45 motherboard with a number of connected SATA discs. (plus one external USB-disc) I have a small 200 GB as boot disc, one 250 GB which I have emptied and two 3TB discs for media. (plus one small 80 GB disc that doesn't even show up on my system). Anyway, the two 80GB and 250 GB are not used so I want to remove them to reduce the heat in the box. My problem is that when I remove them, my systems fails to boot and I get stuck in a boot menu with several options of older kernels to boot with, none of will boot though. The only way I can boot my system is to reconnect the two drives again This starts to drive me nuts! Does anyone heard of this before and can point me in a direction for a solution? // T

  • Issue#64476: Autodesk - Brightness setting of SID aerial issue...

    Good day,We have two aerial SID files that we'd like to change the brightness of. However when we adjust the brightness and apply it appears to create a wipeout around the aerial hiding the one next to it. Any suggestions on why this might be occuring would be helpful. Thanks,ervin

  • Issue#65266: Lenovo - External Display issue with P50 on Linux

    Hello! I have a P50 (TopSeller 20EN0013US) and dual boot Windows 10 Pro and UbuntuGnome 15.10 with it. I have been having an issue connecting external displays via the laptop's mini-DisplayPort connector. When I plug in an external display while the machine is running, the internal display will begin turning on and off every second, until the external display is disconnected. The external display never turns on. I have the bios set to use dedicated graphics only. I am using the binary Nvidia driver, version 352.63, and have also tried the 352.79, 358.xx, and 361.xx (from the nvidia-drivers ppa) which all have the same issue. I am using the kernel version 4.2.0.27, which is the stock 15.10 ubuntu kernel. The issue does not occur under Windows 10 Pro. I have been able to work around the issue by setting the mini-Displayport to the primary display device (so it is visible at boot, and ends up being used for the console framebuffer), which then allows me to switch to the console

  • Issue#80883: Linux - Non Advanced editing mode will remove % from Perl code

    Perl code declares a hash as my %hash. If the code has been posted within proper code tags and the need arises to make a quick editing to another part of the post, if you are not careful and go into Advanced mode, the sigil % will be removed from every instance that it has been defined. Is it possible to fix this? Thanks

  • Issue#84797: Linux - aptitude and cups issues in latest SID

    is anyone having issues with aptitude and cups in the latest sid release?

  • Issue#87206: Linux - [SOLVED] Pulseaudio and wine (sound issue) on -current

    I am using mostly playonlinux (so all different versions of wine) however i get this problem with both the wine package from slackbuilds, and within playonlinux, when configuring wine (winecfg) and testing the sound. I can hear no sound in any games, or with the test button; this prints out in the terminal: Code: Aerr:module:load_builtin_dll failed to load .so lib for builtin L"winepulse.drv": libjson-c.so.2: cannot open shared object file: No such file or directory ALSA lib dlmisc.c:254:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/alsa-lib/libasound_module_pcm_pulse.so ALSA lib dlmisc.c:254:(snd1_dlobj_cache_get) Cannot open shared library /usr/lib/alsa-lib/libasound_module_pcm_pulse.so err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded I had recently installed these packages alsa-plugins-compat32-1.1.0-x86_64-2compat32 pulseaudio-compat32-8.0-x86_64-1compat32 , hoping they provide what migh

  • Issue#88213: Linux Mint Cinnamon 17.3 in software rendering mode issue

    This has been chatted about but thought there was no definite resolution. (Is there?) I read this is a bug, is it? Installed Cinnamon 17.3 all the latest ISO/updates etc on an Acer Aspire with an Intel video card. It boots in software rendering, rendering this wee little lappy soggy slow. Here's the output of the famous INXI command: [email protected] ~ $ inxi -F System: Host: aw-AOD270 Kernel: 3.13.0-37-generic i686 (32 bit) Desktop: Cinnamon 2.8.6 Distro: Linux Mint 17.3 Rosa Machine: System: Acer (portable) product: AOD270 v: V1.06 Mobo: Acer model: JE01_CT Bios: Insyde v: V1.06 date: 03/05/2012 CPU: Dual core Intel Atom N2600 (-HT-MCP-) cache: 512 KB clock speeds: max: 1600 MHz 1: 600 MHz 2: 600 MHz 3: 600 MHz 4: 1600 MHz Graphics: Card: Intel Atom Processor D2xxx/N2xxx Integrated Graphics Controller Display Server: X.Org 1.15.1 drivers: (unloaded: fbdev,vesa) Resolution: [email protected] GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 2.1 Mesa 10.1.3 Audio: Ca

  • Issue#90010: Linux - 14.2/Current Xorg issue

    When I try to run Xorg -configure or xorgsetup results in X generating an error and refusing to write an xorg.conf for diagnostic and testing purposes. Xorg is working correcting with the automatic configurations though. I'm on my mobile at the moment, so I can't duplicate or post the error, yet. This is a fresh install for an ISO.

  • Issue#106496: Linux - remove line

    I have the below file , I just would like to have a method ( script ) so that to find the line(s) have the string "yyy" , then delete the lines with such string , would advise how to write script ? thanks Code: #vi example.txt aaa bbb ccc xxxx aaa bbb ccc yyy aaa bbb ddd yyy after run the script ,the output should be as below . Code: aaa bbb ccc xxxx

  • Issue#108467: Linux - GT440 + GF210 nvidia driver issue (legacy + regular)

    I run 2 different graphics cards in my host (GT440, GF210) w/ debian testing. Until now, everything worked fine, I could configure them both with the nvidia-settings utility. After the last update, it seems that the GT210 was moved to the legacy driver package (got some warnings and the message I should install this package): Code: Checking card:  NVIDIA Corporation GF108 [GeForce GT 440] (rev a1) Your card is supported by all driver versions. It is recommended to install the     nvidia-driver package. Checking card:  NVIDIA Corporation GT218 [GeForce 210] (rev a2) Your card is only supported up to the 340 legacy drivers series. It is recommended to install the     nvidia-legacy-340xx-driver package. The GF210 does not work any longer. When kernel module of the nvidia-driver package is loaded, it tells me: Code: [  267.550268] NVRM: The NVIDIA GeForce 210 GPU installed in this system is               NVRM:&nb

  • Issue#118499: Linux - systemctl suspend - USB sleep / wake issue

    When I use systemctl suspend one of 3 things happens: 1. Everything suspends fine, and I can wake up my computer by just tapping on the keyboard. 2. The system suspends, but it looks like my keyboard / mouse are still powered on (they remain lit-up). When I go to wake the machine up by tapping on the keyboard nothing happens. I can wake the machine by pressing on the power button, though, and then everything is working fine. 3. Like 2, the system suspends but the keyboard / mouse remain on (or so it looks). I again can't resume with the keyboard. When resuming by pushing the power button the system wakes up, but the keyboard / mouse are unresponsive. Sometimes if I switch the USB port the keyboard / mouse are using they will become active again, while other times I have to restart the machine with the restart button because I can't get the keyboard or mouse to respond. There is no set of conditions that I have identified that leads to 1 vs 2 vs 3. It seems that 2 is the most fr

  • Issue#120741: Linux - Routing Issue - I think

    I'm having a bit of an issue with a dual network setup in on a VM guest in Proxmox. I'm pretty sure this is not directly Proxmox related. Here is the situation. I have to VM guests, first a pFsense host and second a linux Ubuntu host. The linux Ubuntu host has two network interface cards setup. one with a public IP which currently has all ports blocked with IP tables except port 22 for ssh. The second network interface has a local IP 192.x.x.x The pFsense guest has two network interfaces. The first interface is the WAN interface with a public IP and the second network interface is on the LAN with a local IP of 192.x.x.x Same subnet as the second interface of the Ubuntu guest. I can ping back and forth between the two local IPs of both VMs. I can ssh back and forth between both local interfaces. So all is good there. Both VM guests can also access the internet just fine out of their WAN interfaces. Here is the issue. I would like to port forward say port 2222 from the pFesnse guest

  • Issue#122040: Linux - How to remove the last dissidents of Unity?

    A short story: The governance under my dictatorship in the kingdom of Laptop was easy at the beginning. I hired a prime minister called Ubuntu who did the job well, but as trade started to develop with foreign lands and we had to establish new businesses like Eclipse, Android sdk, Firefox, php and a few others, our treasury-minister, Mr. Unity started to show the signs of a retard. The bloke started having some "memory problems". He was an eccentric chap to begin with, liked to spend a lot of his mental energy on stuff like fancy clothes, hair style, skin ointments, etc. and just couldn't seem to take some time off for my businesses. As a result, I just fired Unity and hired a new guy called GNOME in his place. GNOME seemed to do the job well at the beginning. Good thing was that he was not as eccentric as Unity and seemed to spare a lot of time and energy for looking after my trades. However, this didn't last long as my business started expanding even more. I started rec

  • Issue#125026: Linux - Slackpkg+ issue on current

    I'm running Slackware64_current as of 11/02/2016 and I'm getting an error when slackpkg+ is enabled via the on/off variable at th etop of slackpkgplus.conf Installed versions are :- Slackpkg-2.82.0-noarch-16 Slackpkg+-1.6.1p2-noarch-1mt when slackpkg+ is enabled I get the following error, ls: cannot access '*.t[blxg]z': No such file or directory Everything seems to work OK ? If it's my setup any hints on where to look for the problem will be gratefully received.

  • Issue#129505: Linux - Remove Atlassian Fisheye and Crucible Software

    Found this older software from Atlassian which filled up a a directory under /opt called Fisheye and Crucible. They haven't been used since 2010 and I want to remove them. I am unable to find documentation on how to remove them. I was at least able to stop Fisheye under /opt/fecru-2.3.1/bin however don't see .sh to remove. I've searched the Atalassian website and don't see any info on how to do this. thanks

  • Issue#131868: Linux - How to remove or change file names in Gnucash

    When I run Gnucash,if I open the File menu, at the foot of the menu (immediately above "Quit" and "Close") it offers me a list of possible accounts. Unfortunately some of the names it offers are accounts that no longer exist. Is there a way to remove these names? Similarly, some of the valid account names were poorly chosen—is it possible to edit them? Thanks

  • Issue#132563: linux ethernet issue

    Hi all I have used UG1165 for "booting linux" http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/ug1165-zynq-embedded-design-tutorial.pdf   It was successfully done until step 14 in page 71 (changing IP addr/subnet mask of host computer) Also, I have connected ethernet cable between host computer and target board(zc706)   After setting IP address for host computer & target board (ZC706),  "ping" command was given on user guide.   So, I basically used ~# ping 192.168.1.1 (for target board ip addr)     Also, I used  ~# ping 192.168.1.5 (for host computer ip addr)   the result is below capture image   using ping command for target board seems working properly while ping command for host computer seems not working.   I assume that both ping command for host computer & target board should work. Am I having a wrong assumption?  If my assumption is correct, how can I fix this issue?   Also I have removed eth

  • Issue#138371: Linux - Multi Interface host resolving issue

    Greetings, I've 2 Wan Interface Eth0 , Eth1 and one out put Lan on eth1. Every thing was working perfect on both wan interfaces , suddenly few days back on eth2 an issue raised that its not resolving any of host indeed ive tried tracert ping nothing worked with domain name but when I ping 8.8.8.8 it does work or dig @8.8.8.8 bing.com it does resolve . I'm using google dns in /etc/resolve.conf nameserver 8.8.8.8 nameserver 4.2.2.2 On other end when I shut down the interface eth2 and up the eth0 it does resolve hostname every thing work like a charm. even I did transfer the eth0 ISP on eth2 it does not work out :/ . I've no local dns running . Im usind dns forwarder only for my local clients using dnsmasq and using google dns for them as well. Any idea what's wrong with that. Regards Net_Spy

  • Issue#138750: Linux - Will Un-installing VMware Player remove my VMDK Files??? my actual OS VM's?

    Hello World, Does anyone know if I decide to un-install my VMware Player. Will it remove my VM's OS' files? Will it remove my actual OS VM vmdk files? Any help is much appreciated. Thanks in advance :)